|
|
|
A Complete Product Catalog is on this site!! |
|
|
 |
|
|
Pre-Set Adjustable Handles
-
Great for adjusting to the perfect working spray width
-
Limit the amount of needle travel, allowing for greater control of the airbrush
-
Ideal for students getting started or for professionals where the finest control of spray is needed
-
Adjustment screw is finely threaded, allowing for precise fine tuned control
-
Handles available for all Iwata airbrushes, except the Revolution SAR
Crown Caps
-
Can replace the needle cap on most Iwata airbrushes
-
Decreases paint build-up on the needle and in the nozzle cap, eliminating spitting
-
Shorter length allows for finer detail work while still protecting the needle
|
 |
|
Pre-Set Handles |
|
Pre-Set Handle HP-A, B, SB |
I
155 1 |
$37.00 |
|
|
Pre-Set Handle HP-C, BC, BC2, CS, SBS |
I 155 2 |
$37.00 |
|
|
Pre-Set Handle HP-BE1, BE2 |
I 155 3 |
$37.00 |
|
|
Single-Cut Handle HP-C, BC, BC2, CS, BCS, SBS |
I 619 1 |
$24.00 |
|
|
Crown Cap |
|
Crown Cap HP-A, B, SB, C, BC, BC2 (Plus Series) |
I 105 0 |
$18.00 |
|
|
Fluid Cups |
| 1/8 oz. (4ml) Side Cup HP-SB+, SBS |
I 070 3 |
$37.00 |
|
| 1/4 oz. (7ml) Side Cup HP-SB+, SBS |
I 070 4 |
$37.00 |
|
| 1/2 oz. (14ml) Gravity Cup HP-SB+, SBS |
I 070 6 |
$37.00 |
|
|
Iwata-Medea Pistol-Grip Filter for clean, dry air-flow.
Attaching directly onto the airbrush, the Iwata-Medea Pistol-Grip Filter is the final defense to deliver clean, dry air to your airbrush. Miniature in size, the super-fine, 5-micron filter element performs like a full-size filter separator.
The clear filter bowl allows a visual inspection of built-up moisture and is evacuated through a spring-loaded release valve - without taking the filter off the airbrush.
Comfortable in the hand, the Pistol-Grip Filter acts as a handle on the airbrush to relieve muscle tension.
More Moisture Filters & Regulators & Parts
|
 |
|
Pistol Grip Filter &
Moisture Filters |
| Pistol Grip Moisture Filter |
F A450 |
$31.00 |
|
| Moisture Filter |
F A500 DH |
$48.50 |
|
| Moisture Filter
with Regulator & Gauge |
F A600 DH |
$92.75 |
|
|
Regulator & Parts |
| Pressure
Regulator and Gauge |
F A700 DH |
$56.75 |
|
| Regulator
Bracket Nut (F A600 & F A700) |
012 105 |
$6.70 |
|
| Regulator Mounting Bracket Mount "L" |
012 296 |
$12.75 |
|
| Regulator Mounting Bracket Mount Flat |
008 008 |
$12.75 |
|
|
|
Quick Disconnects
-
Allow versatile use of multiple airbrushes with one air source and hose
-
Completely shuts off airflow when disconnected
-
Screws onto all Iwata airhoses and airbrushes
-
With its quick-release action, changing airbrushes is fast and easy
-
Rated for air pressures up to 120 psi
|
 |
|
Quick Disconnects |
| Quick Fit Quick Disconnect Adapter Set |
I 160 3 |
$16.50 |
|
| Quick Fit Quick
Disconnect Adapter MALE ONLY |
I 160 4 |
$7.75 |
|
Multiple-Valve Assemblies |
 |
|
Multiple Valve Assemblies &
Fittings |
| ¼" Male to Male Brass Fitting |
012 001 |
$4.15 |
|
| ¼" Male to
Female Brass Fitting |
012 002 |
$4.15 |
|
| ¼"
Female to Female Brass Fitting |
012 013 |
$4.15 |
|
| ¼" Quick Disconnect Set |
012 010 |
$30.50 |
|
| ¼" Quick Disconnect Adaptor |
012 011 |
$6.75 |
|
| Teflon Tape ½" x 260" |
012 012 |
$4.60 |
|
| On/Off Valve |
012 003 |
$22.75 |
|
| 2-Way Valve Assembly |
012 004 |
$49.00 |
|
| 3-Way Valve Assembly |
012 005 |
$65.00 |
|
| 1/4" Female to 1/8" Male Adaptor |
I 624 1 |
$17.50 |
|
|
|
Airbrush Holder |
|
Deluxe Airbrush Holder with Regulator Bracket |
AH 200 |
$41.00 |
|
|
|
|
